EC, TDS and salinity compatible
Electrode output plus integrated NTC temperature signal.
Conductivity / TDS Probes
3/8-inch NTC Probe
EC / TDS / Salinity Probe with NTC
Food-contact quick-connect electrode probe with integrated NTC temperature sensing.
Key Specifications
- Interface
- Electrode + NTC leads
- Supply
- Host circuit dependent
- Measurement Range
- Electrode and cell-constant dependent
Product capabilities
Evaluate the capabilities that matter in your system
A 3/8-inch quick-connect electrode probe with integrated NTC temperature sensing for analog EC/TDS front ends. It gives OEMs a compact wetted component while leaving measurement electronics in the host product.
Titanium, gold and platinum electrode options
Public drawing specifies up to 5 V across the probe and operating current up to 10 mA.
High-pressure solid molded construction
10 kΩ, B3435, 1% NTC configuration is documented for the available assembly.
Integrated precision NTC temperature sensor
Range and accuracy depend on electrode material, cell geometry, host ASIC and calibration.
Overview
Product overview
A 3/8-inch quick-connect electrode probe with integrated NTC temperature sensing for analog EC/TDS front ends. It gives OEMs a compact wetted component while leaving measurement electronics in the host product.
Food-contact quick-connect electrode probe with integrated NTC temperature sensing. • EC, TDS and salinity compatible • Titanium, gold and platinum electrode options • High-pressure solid molded construction • Integrated precision NTC temperature sensor • RoHS-oriented materials and 3/8-inch quick connection
Engineering notes
Selection and system integration
- 01Electrode output plus integrated NTC temperature signal.
- 02Public drawing specifies up to 5 V across the probe and operating current up to 10 mA.
- 0310 kΩ, B3435, 1% NTC configuration is documented for the available assembly.
- 04Range and accuracy depend on electrode material, cell geometry, host ASIC and calibration.
Technical data
Key Specifications
Use this information for initial selection; confirm final design and purchasing against the current approved datasheet and sample.
- Interface
- Electrode + NTC leads
- Supply
- Host circuit dependent
- Measurement Range
- Electrode and cell-constant dependent
- Accuracy
- Application calibration dependent
- Temperature
- 0–90 °C design range
Application readiness
Installation, calibration and validation
Validate the product with real samples, final mechanics and the intended electrical environment before production.
- 01
Use the lowest practical excitation current to reduce electrode wear.
- 02
Match the host temperature network to the installed NTC option.
- 03
Calibrate the complete water path after production assembly.
Public documents
Datasheets and product documents
Documents are based on AtomBit public product information; confirm the current revision before design release.
Related products
Products in this range
Conductivity / TDS Probes
3/8-inch Digital Probe
Digital EC / TDS / Salinity ProbeCompact quick-connect digital probe for conductivity, TDS and salinity applications.
Learn More →
Conductivity / TDS Probes
TFE-1-A1
Compact Planar Ring-electrode ProbeCompact planar electrode assembly for embedded conductivity and TDS product designs.
Learn More →
Conductivity / TDS Probes
TFE-304-M6
Planar Ring-electrode Temperature ProbeEasy-clean planar ring electrode with integrated temperature sensing for molded product integration.
Learn More →